Luxello  |  Modern Numbers 3" Lighted Brass

Luxello | Modern Numbers 3" Lighted Brass

Be the first to leave a review

ic-local-shipping-black-24dp-1x-copy.jpg  Delivery: approximately 4 weeks

Machined from a solid block of brass, then plated in brass for prolonged exterior use. Screw Down Casing, Light: 4 - 6 CREE LED, Colour Temp: 3500 - 4000K. LED driver not included. IP Rating 44. 

Height 7.62cm
Width 2.5 - 5 cm
Depth 1.9cm
12 - 16 Volt AC / DC 

Luxello Modern Numbers 3″ Lighted Brass
The Brass Modern LED 3” Numbers by Luxello are versatile outdoor / indoor illuminated numbers. The Illuminated 3″ numbers are ideal for interior number signage applications or where a smaller number is required. 

The luxurious 3″ numbers are very precisely machined from a block of brass, they are then plated in brass, and are IP44 rated for prolonged outdoor usage. Optional wall spacers can also be added to project the numbers off the wall and further enhance the illumination.

The brass LED numbers have a backlit casing which screws down like a swiss watch, it encloses the 6 – 9 CREE LED. The LED panels are interchangeable and can be replaced at any time. The numbers require powered from a standard doorbell transformer or LED driver. 

Electrical Requirements
The numbers require a minimum of 12 - 16 Volt AC or DC for optimum voltage. These are low voltage so require a transformer like a doorbell transformer or a 5 Watt LED Driver. Your electrician will need to advise you on what type of driver to use as this is dependant on where the numbers are being placed and where the driver can be housed.

A single power supply is enough to illuminate up to 6 numbers. The wires from each number are all connected to the same power supply they do not have any polarity. A battery power pack that can output the required voltage requirements can be used as well. 3” numbers use between 0.4 -0.6 wUse a 5 or 10w LED driver. The constant current should not exceed 16 volts.

Light Sensor 
You can have the numbers switch on automatically at dusk by installing a light sensor from Lutron on a switch. The switch will turn the power supply on and off which in turn feeds the power to the numbers.

About Luxello
Luxello designs modern architectural LED solutions. A flexible and customizable illuminated number sign systems that offer bright information visibility for the hotel, condominium and commercial market. The recessed LED lighting line provides state of the art ambient and functional illumination for hallways and staircases.